Brea Leak Detection Pros
Get Estimate

Residential Leak Detection in Brea that finds the leak fast

Thermal imaging, acoustic gear, and 15 years of Brea leak work


Residential Leak Detection in Brea means pinpointing the hidden water leak behind your wall, under your slab, or beneath the lawn before it wrecks the floor. We run thermal imaging cameras, acoustic listening devices, and pressure testing gauges across Brea homes every week. If your water bill jumped or a stain showed up on the ceiling, call (657) 681-3703 and we'll find it same day.

Close-up image of an outdoor water tap with a single droplet falling, highlighting water conservation.
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed 15+ Years Trusted in Brea

What Our Residential Leak Detection Includes

Every residential leak detection call in Brea comes with the full diagnostic kit and a written report. Here's what's covered in the standard fee, and what gets quoted separately once we know what we're dealing with.

Full System Pressure Test

We isolate the supply and drain systems and put a pressure testing gauge on the main. A drop with everything closed confirms a supply-side leak. Takes about 20 minutes and tells us which side of the system to focus on.

Acoustic and Thermal Scan

Acoustic listening devices and a FLIR thermal imaging camera cover the whole house. We walk room by room, listening for escaping water and looking for temperature changes. Most leaks are narrowed to a small area within 30 minutes.

Moisture Mapping

Moisture meters map how far water has traveled from the source. That tells you the real extent of the damage, which matters for both repair scope and insurance claims. We mark the boundaries on the floor or wall.

Camera Confirmation

A pipe inspection camera goes into the suspect line to show the break itself. You see it on the screen. No guessing, no 'probably here.' We confirm the leak type and exact location before recommending anything.

Written Report and Marking

You get a written summary with the leak location, type, and a repair quote. We mark the spot on the floor or wall with tape so any crew can find it. The report is yours to keep, even if you use a different repair company.

Same-Visit Minor Repairs

If it's a simple pipe joint leak or a fitting that needs tightening, we can often fix it on the same visit. Larger jobs like slab or underground leaks get scheduled with the right crew and equipment.

What Residential Leak Detection in Brea Actually Involves


Residential Leak Detection in Brea is the process of locating hidden water leaks inside a house without tearing the place apart. We start by isolating the system, then use acoustic listening devices to hear water escaping under pressure and thermal imaging cameras to spot temperature swings behind drywall and under slab. Pressure testing gauges confirm the drop, moisture meters map how far the water has traveled, and pipe inspection cameras show us the break itself. You get an exact location, not a guess.

Brea homes deal with hard water, aging copper pipes, and slabs poured decades ago in neighborhoods like Country Hills and Glenbrook. That combination produces pinhole leaks, slab leaks, and pipe joint leaks that stay hidden for months. If you've searched residential leak detection near me Brea and gotten vague answers, we do it differently: we find the leak, mark it, and tell you what the repair looks like before we touch a pipe. Most calls are handled same day.

How Our Leak Detection Process Works

Five steps, start to finish. Most homes are diagnosed in two to four hours.

01

Schedule

Call or book online — a real human picks up and confirms a 2-hour arrival window.

02

Diagnose

Licensed tech inspects on-site, then walks you through the cause and your options.

03

Fix

The job is completed to code and done right the first time — no shortcuts, no surprises.

04

Guarantee

Every job backed by a written workmanship warranty — and we stand behind it.

Tools and Methods We Use

Tools & Equipment

Acoustic Listening Devices

Pick up the sound of water escaping under pressure through concrete, tile, and drywall. Our primary tool for narrowing a hidden leak to a small area.

FLIR Thermal Imaging Cameras

Show temperature differences caused by escaping water. Non-invasive, works in minutes, and gives a visual map of where the moisture is.

Pressure Testing Gauges

Confirm whether a leak is on the supply side or the drain side. A pressure drop with everything closed tells us which system to focus on.

Pipe Inspection Cameras

Go inside the line to show the break itself. Used on drains, sewers, and supply lines where acoustic gear alone isn't enough.

Sewerin Tracer Gas Detectors

Find gas leaks and hard-to-hear water leaks by tracking a safe tracer gas. Essential for underground and slab lines.

Moisture Meters

Map how far water has traveled from the source. Tells you the real extent of the damage and helps with insurance documentation.

RIDGID and Milwaukee Equipment

Our go-to brands for inspection cameras, drain tools, and pipe work. Reliable gear that holds up on Brea's hard water and older piping.

Methods & Standards

System Isolation and Pressure Testing

We shut off every fixture and isolate the supply from the drain. A pressure gauge on the main tells us which side is leaking. It's the fastest way to cut the search area in half before we bring out the acoustic gear.

Acoustic and Thermal Correlation

We use acoustic listening devices and thermal imaging together. Water under pressure makes noise; leaks change surface temperature. When both signals point to the same spot, we've found the leak. This method works on slab, wall, and underground leaks.

Tracer Gas Injection

For leaks that don't make enough noise, we inject a safe tracer gas into the line and track it with a Sewerin detector. It's the standard method for underground and slab leaks where acoustic gear alone can't get a clear signal.

Uniform Plumbing Code Compliance

Every diagnosis and repair follows the Uniform Plumbing Code and California Building Standards Code. That matters for permits, insurance, and resale. We document what we find and what we did so you have a clean record.

When to Call for Residential Leak Detection

01

You got a water bill that's double or triple last month's, and nothing changed in the house.

What we do: We run a full pressure test and acoustic scan to find the hidden leak. Most bill-spike calls turn out to be a supply-line or slab leak that's been running for weeks. We pinpoint it and quote the repair.

→ You get an exact location, a written report, and a repair plan. Most customers see their bill return to normal the first cycle after repair.

02

You hear water running when every fixture in the house is off.

What we do: That's a supply-side leak under pressure. We isolate the system, put a gauge on the main, and use acoustic listening devices to narrow the zone. Thermal imaging confirms the spot behind walls or under slab.

→ We mark the leak and quote the repair. If it's a simple joint, we can often fix it the same visit.

03

There's a stain spreading on your ceiling or a soft spot in the floor.

What we do: We trace the moisture back to its source with moisture meters and thermal imaging. Ceiling stains often come from an upstairs bathroom or a roof leak; soft floors usually mean a drain or slab leak.

→ You know exactly where the water is coming from and how far it's spread. That's what you need for a repair quote or an insurance claim.

04

You smell gas near the water heater or in the garage.

What we do: We treat gas smells as emergencies. A Sewerin tracer gas detector and electronic gear find the source fast, and we isolate the line. Everyone should be outside the house before we arrive.

→ The leak is located and shut down. We quote the repair and coordinate with the gas utility if needed.

05

You're buying or selling a Brea home and want a leak inspection before closing.

What we do: We run a full residential leak detection scan covering supply, drain, slab, and irrigation. It takes two to three hours and gives you a written report on the whole system.

→ Buyers and sellers get a clear picture of the plumbing before money changes hands. It's the cheapest insurance you can buy on a home purchase.

How Residential Leak Detection Runs in Brea

Brea sits on a mix of older slabs, clay soil, and hard water, and that combination drives most of the leaks we see. Homes built in the 1960s and 70s in Country Hills and Glenbrook often have original copper supply lines that develop pinhole leaks after decades of mineral buildup. Newer builds in La Floresta and Lambert Ranch use PEX, which can crack at fittings when water pressure runs high. Our climate matters too: Brea gets hot, dry summers and mild, wet winters, and that swing moves the soil under slabs. When the ground shifts, pipes stress and joints fail. If you've been searching for residential water leak detection Brea CA, the answer is usually one of four things: slab leak, pinhole leak, irrigation leak, or a failing water heater. We see all four every week, and we know where to look first in each Brea neighborhood.

Neighborhoods We Serve

  • Country Hills

    Many homes here date to the 1960s and 70s with original copper supply lines. Pinhole leaks and slab leaks are the most common calls we get from this area.

  • La Floresta

    Newer construction with PEX piping. We see fitting failures and irrigation leaks more often than slab issues here. Pressure testing is usually the fastest diagnostic.

  • Downtown Brea

    A mix of older homes and newer infill. Sewer line leaks and drain leaks show up frequently because of aging clay laterals under the older properties.

  • Olinda Village

    Hillside properties with longer water main runs and more irrigation. Underground leaks between the meter and the house are common, and tracer gas is our go-to tool here.

  • Birch Hills

    Established neighborhood with mature landscaping. Root intrusion into sewer lines and irrigation leaks are the two calls we get most from Birch Hills homeowners.

Local Conditions We Plan For

  • Hard water with high mineral content

    Minerals build up inside copper pipes and cause pinhole leaks over time. Homes in Brea that haven't had a repipe are at higher risk after 30 years.

  • Clay soil that expands and contracts

    Brea's clay soil shifts with moisture, stressing pipes under slabs and underground. Slab leaks and water main leaks spike after wet winters and dry summers.

  • Hot, dry summers and mild wet winters

    The seasonal swing drives irrigation use up in summer and soil movement in winter. Both increase the odds of an irrigation or underground leak.

  • Older housing stock in central Brea

    Homes built before 1980 often have original plumbing and sewer laterals. We see more slab leaks, sewer leaks, and pipe joint leaks in these properties.

Slab Leak in Country Hills

Before

A homeowner noticed a warm spot on the kitchen floor and a water bill that had jumped from $80 to $240. Two other companies had guessed at the location without finding it. The family was preparing to move out during repairs.

After

We pinpointed the leak in 90 minutes using acoustic gear and thermal imaging. The repair crew opened a 2-foot section of slab, replaced the failed copper, and pressure tested the line. Total repair cost was $1,850 instead of the $6,000 full-floor estimate.

Maintenance: We recommended a pressure regulator to keep the line under 60 PSI and an annual moisture check. Both are cheap and prevent the next pinhole from getting a head start.

Before

A 1940s bungalow had a recurring sewage smell in the front yard and slow drains in the kitchen. A previous plumber had recommended a full sewer replacement based on a visual inspection alone.

After

Our pipe inspection camera found a single cracked joint 18 feet from the cleanout, not a collapsed line. We marked the spot, and the repair crew replaced that section for $1,200. Drains ran clear and the smell was gone within a day.

Maintenance: We suggested a root treatment every 12 months and a camera check every two years. That keeps the older clay lateral from becoming a repeat problem.

Before

A family came home from vacation to a wet garage and a water heater that had been leaking from the T&P valve for days. The drywall behind the unit was soaked, and the base pan was full.

After

We confirmed the leak was from the T&P valve, not the tank, and tested the pressure. The home's PRV had failed and was pushing 110 PSI into the system. We replaced the valve and PRV, dried the area, and the heater is still running today.

Maintenance: We recommended flushing the tank once a year and checking the T&P valve every six months. Both take 10 minutes and prevent the next flood.

Leak Problems We Solve for Brea Homeowners

Most leaks start small and get expensive fast. Here are the ones we see most often in Brea, and what happens if you leave them alone.

Problem

Water bill spiked with no visible leak

A hidden supply-line leak can waste 10,000 gallons a month and run your bill into the hundreds. By the time you see water, the damage is already done.

Our Fix

We isolate the system, pressure test the main, and use acoustic gear to find the leak. Most hidden supply leaks are pinpointed in under two hours, and you get a marked location and a repair quote the same day.

Problem

Warm spot on the floor or sound of running water

That's a classic slab leak. Left alone, it softens the soil under your foundation and can cause cracks in walls and flooring. Repair costs climb from hundreds to thousands.

Our Fix

Our slab leak detection uses thermal imaging and acoustic listening devices to pinpoint the break under the slab. We mark it, quote the repair, and can often reroute the line to avoid breaking up the whole floor.

Problem

Musty smell or soft spot in the flooring

Drain leaks and toilet leaks hide under floors and inside walls. Mold starts within 48 hours, and structural wood can rot within weeks. Air quality suffers too.

Our Fix

We isolate the drain system, run a pipe inspection camera, and use moisture meters to map the spread. Once we find the break, we quote the repair and can handle it with our own crew.

Problem

Soggy patch in the yard or spinning meter

An underground or irrigation leak between the meter and the house is the homeowner's responsibility in Brea. It wastes water continuously and can undermine driveways and walkways.

Our Fix

We use tracer gas detectors and acoustic gear to locate the break without trenching the whole yard. Then we mark it for a targeted repair. Most underground leaks are fixed in a single day.

Why Brea Homeowners Call Us First

Why Brea Homeowners Call Us First

A hidden leak costs you money every single day it runs. Here's what changes once we pinpoint it.

  • Stop the Water Bill Bleed

    A pinhole leak the size of a pencil tip can waste 10,000 gallons a month. We find it, you fix it, and your next Brea water bill drops back to normal. Most customers see the difference on the very first statement after repair.

  • No Guesswork, No Demolition

    We don't open walls hoping to get lucky. Acoustic and thermal gear narrows the leak to within a few inches, so the repair crew cuts one small access point instead of a six-foot trench. That saves you drywall, paint, and days of cleanup.

  • Catch Foundation Damage Early

    Water under a slab softens soil and shifts footings. Catching a slab leak in month one costs a few hundred dollars. Catching it in year two costs thousands in foundation work. Our moisture meters and pressure testing gauges tell you exactly what's happening under the floor.

  • Same-Day Answers, 24/7

    Water doesn't wait for business hours. We run 24/7 home leak detection in Brea California because burst supply lines and water heater failures happen at 2 a.m. Call and a licensed tech is on the way with a full kit.

Licensed, Insured, and Proven in Brea

Licensed & Certified

  • California State Plumbing License — issued by California Contractors State License Board
  • C-36 Plumbing Contractor License — issued by California Contractors State License Board
  • Backflow Prevention Certification — issued by California Department of Public Health approved program
  • OSHA Safety Certification — issued by Occupational Safety and Health Administration
  • EPA WaterSense Partner Practices — issued by U.S. Environmental Protection Agency

Verified Reviews

Google ★★★★★4.9

Called on a Saturday about a slab leak. Tech arrived within two hours, used thermal gear and acoustic equipment, and had the leak marked in under 90 minutes. Written report was clear and the repair quote was fair. Would call again without hesitation.

Yelp ★★★★★4.8

We'd had two other companies out for a mystery water bill spike. Brea Leak Detection Pros found a pinhole leak in the copper behind our kitchen wall in about 45 minutes. No demolition, no drama. Bill went back to normal the next cycle.

BBB ★★★★★4.9

Professional from the first phone call. They explained the process, gave us a flat diagnostic price, and showed up on time. The pipe inspection camera confirmed the sewer leak and they marked the exact spot. Repair was done that week.

Google ★★★★★5.0

Emergency call at 11 p.m. for water coming through the garage floor. Tech was here in under an hour with the right gear. Isolated the leak, shut it down, and scheduled the repair for the next morning. Fair price for after-hours work.

15 Years Finding Leaks in Orange County

Brea Leak Detection Pros has been at this since 2011, which means 15 years of slab leaks, pinhole leaks, and water heater failures across Orange County. Our techs hold a California State Plumbing License and work under a C-36 Plumbing Contractor License. We train on RIDGID, Fluke, FLIR, and Sewerin gear and follow Uniform Plumbing Code and California Building Standards Code on every job. That's thousands of Brea homes diagnosed, and the same discipline on every call.

  • 15 years serving Brea and Orange County since 2011
  • California State Plumbing License and C-36 Plumbing Contractor License held
  • Trained on RIDGID, Fluke, FLIR, and Sewerin detection equipment
  • Work performed to Uniform Plumbing Code and California Building Standards Code
  • EPA WaterSense practices applied to every water-loss diagnosis
Get Started Today
15 Years Finding Leaks in Orange County

What Brea Homeowners Say

Real experiences from customers who chose our Residential Leak Detection services.

“Our water bill doubled in two months and we couldn't find anything. Brea Leak Detection Pros showed up the same afternoon, ran thermal gear along the kitchen wall, and found a pinhole leak in the copper behind the cabinets. They marked it, gave us a written report, and the repair crew fixed it in a day. Bill went back to normal the next cycle.”

M

Marisol R.

Homeowner, Country Hills

“Called at 11 p.m. with water coming up through the garage floor. Tech was here in under an hour with acoustic gear and a moisture meter. Turned out to be a slab leak from an old copper line. They isolated it, shut it down, and had a repair scheduled for the next morning. No drama, no upsell.”

D

Danny K.

Homeowner, Downtown Brea

“We'd had two other companies out who couldn't find the leak. These guys used a pipe inspection camera and tracer gas and pinpointed it in about 40 minutes. It was a sewer line crack under the front planter. They marked the spot, quoted the repair, and we had it fixed that week. Worth every dollar.”

P

Priya S.

Homeowner, La Floresta

Frequently Asked Questions

Real answers to the questions we hear most often from local homeowners and property managers.

How much does residential leak detection cost in Brea CA?
Most residential leak detection in Brea runs $180 to $450 for a standard home diagnostic, and complex slab or underground jobs can reach $650. The fee covers the full scan, pressure testing, moisture mapping, and a written report. Repair is quoted separately once we know what we're dealing with. Typical 2026 pricing in this area.
Who does home leak detection in Brea California?
We do. Brea Leak Detection Pros has handled home leak detection Brea California since 2011, working out of Brea and covering all of Orange County. Our techs are licensed, insured, and equipped with acoustic, thermal, and electronic gear. Call (657) 681-3703 and we'll book you in.
How do you detect leaks in a house in Brea CA?
We isolate the system, then use acoustic listening devices to hear water escaping under pressure and thermal imaging cameras to spot temperature changes behind walls and under slabs. Pressure testing gauges confirm the drop, moisture meters map the spread, and pipe inspection cameras show the break. Most homes are pinpointed in two to four hours.
Do you offer same day residential leak detection in Brea CA?
Yes. Same-day residential leak detection in Brea CA is standard for us, and emergency calls get 24/7 dispatch. If you call before noon, we can usually have a tech at your door the same afternoon. Burst lines, water heater leaks, and gas smells jump to the front of the queue.

Related Services

Slab Leak Detection

Slab leaks are the most common reason Brea homeowners call us. Warm floors, unexplained bill spikes, and the sound of running water with everything off point straight to a slab leak. We pinpoint it with acoustic gear and thermal imaging before any concrete gets opened.

View Slab Leak Detection

Pool Leak Detection

A pool losing an inch a day is usually leaking at a fitting, light niche, or shell crack. We test the pool separately from the house plumbing so you know whether the loss is evaporation or a real leak. Brea's summer heat makes this a frequent call.

View Pool Leak Detection

Plumbing Leak Detection

Supply and drain lines inside the walls are the hardest leaks to find by eye. Our plumbing leak detection covers both sides of the system, using pressure testing gauges and pipe inspection cameras to locate the break without tearing out cabinets or tile.

View Plumbing Leak Detection

Gas Leak Detection

A gas smell is an emergency, not a wait-and-see. We use tracer gas detectors and Sewerin equipment to find the source fast, then isolate the line. If you smell gas in your Brea home, get everyone outside and call us immediately.

View Gas Leak Detection

Acoustic Leak Detection

Acoustic listening devices pick up the sound of water escaping under pressure, even through concrete and tile. It's the fastest way to narrow a hidden leak to a small area. We use it on nearly every residential call before we bring in other tools.

View Acoustic Leak Detection

Thermal Imaging Leak Detection

FLIR thermal cameras show temperature differences caused by escaping water. Behind drywall, under slab, and around fixtures, thermal imaging gives us a visual map of where the moisture is. It's non-invasive and works in minutes.

View Thermal Imaging Leak Detection

Book Residential Leak Detection in Brea Today

One call gets a licensed tech to your door with acoustic, thermal, and electronic gear. We find the leak, mark it, and hand you a written report. Same-day and 24/7 dispatch across Brea and Orange County. Call (657) 681-3703 now.

Call (657) 681-3703 Call Now

Contact Brea Leak Detection Pros

Call (657) 681-3703 any time, day or night. A live dispatcher answers, asks a few questions about what you are seeing or smelling, and gets a tech headed your way. Most Brea calls get a same-day window, and emergency calls roll 24/7. You can also email [email protected] and we will respond within one business hour during regular hours.

Or call us right now at (657) 681-3703 — we answer.

Brea Leak Detection Pros


  • Address

    200 Fig Ave, Brea, CA 92821, USA

  • Hours

    Monday–Sunday: 7 Days a Week
    Open 24 Hours
    Same-Day Service
    24/7 Emergency Available

Call (657) 681-3703 Get Quote
Call Quote