Brea Leak Detection Pros
Get Estimate

Leak Repair Brea CA Done Right the First Time

Licensed, insured, and ready 24/7 across Orange County


When water shows up where it shouldn't, our team delivers Leak Repair Brea CA homeowners and businesses can count on. We pinpoint hidden water leaks, pinhole leaks, and slab leaks with acoustic listening devices and thermal imaging cameras, then fix them the same day whenever possible. Whether you need emergency leak repair Brea CA or a scheduled fix, we get your home dry and your water bill back to normal.

Auto mechanics repairing an engine in a Nigerian workshop. Close-up hands and tools.
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed 15+ Years Trusted in Brea

What Our Leak Repair Service Includes

Every leak repair job includes detection, diagnosis, repair, and testing. Here is what you get when you book us. If additional work is needed, we quote it separately and you decide.

Full Leak Detection

We use acoustic listening devices, thermal imaging cameras, and pressure testing gauges to find the exact source. You get a clear explanation of what failed and why, with photos from our pipe inspection camera.

Flat-Rate Repair Quote

Before we start, you get a written flat price for the repair. It covers labor, materials, and cleanup. If we find additional problems during the repair, we stop and quote them separately. You approve before we continue.

Code-Compliant Repair

We repair with copper, PEX, or PVC that matches your existing system and meets Uniform Plumbing Code and California Building Standards Code. If the job requires a permit, we pull it and schedule the inspection.

Pressure Test Verification

After the repair, we pressurize the line and hold it to confirm no leaks remain. We check the surrounding area with a moisture meter to verify it is drying. You see the test results before we pack up.

Cleanup and Haul-Away

We clean up everything we cut, move, or open. Debris goes with us. If we opened drywall or concrete, we leave it ready for your drywall or concrete contractor to finish, or we can recommend someone local.

Written Repair Summary

You get a written summary of what we found, what we repaired, and what materials we used. It includes maintenance notes and any recommendations for preventing future leaks. Keep it for your records or for resale.

What Leak Repair Brea CA Actually Involves


Leak Repair Brea CA is the process of locating and permanently sealing or replacing the failed section of pipe, fitting, or fixture that is letting water escape. We start by confirming the leak with pressure testing gauges and moisture meters, then use pipe inspection cameras to see exactly what failed. Once we know the source, we repair it with copper pipes, PEX piping, or PVC pipes that match your existing system, and we pressure-test the line before we leave. Most jobs take two to four hours from arrival to final test.

Brea homes face specific leak risks. The clay-heavy soil in older neighborhoods shifts with our dry summers and wet winters, which stresses underground lines and causes slab leaks and pinhole leaks in copper. Homes built before 1990 often have original galvanized or early copper plumbing that is now at the end of its service life. If you have been searching for leak repair near me Brea, we serve the entire 92821, 92823, and 92822 area and can usually be on-site the same day you call.

How Our Leak Repair Process Works

Five steps, no guesswork. Here is exactly what happens from the moment you call until the leak is fixed and tested.

01

Schedule

Call or book online — a real human picks up and confirms a 2-hour arrival window.

02

Diagnose

Licensed tech inspects on-site, then walks you through the cause and your options.

03

Fix

The job is completed to code and done right the first time — no shortcuts, no surprises.

04

Guarantee

Every job backed by a written workmanship warranty — and we stand behind it.

Tools and Methods We Use for Leak Repair

Tools & Equipment

Acoustic Listening Devices

We use these to hear water escaping through concrete, behind walls, and under slabs. It is the least invasive way to find a hidden leak and the first tool we reach for on most jobs.

Thermal Imaging Cameras (FLIR)

Infrared cameras show temperature differences caused by escaping water. We use them to find leaks behind tile, inside walls, and under floors without tearing anything out.

Pipe Inspection Cameras (RIDGID)

We run these through drain and sewer lines to see cracks, root intrusion, and failed joints. They also let us show you exactly what failed before we quote the repair.

Pressure Testing Gauges

We use these to confirm the leak and to verify the repair. If the gauge holds steady after the repair, the line is sealed. If it drops, we keep looking.

Moisture Meters (Fluke)

These tell us how wet a wall, floor, or cabinet is and whether it is drying after the repair. We use them before and after every job to verify the area is returning to normal.

Tracer Gas Detectors (Sewerin)

For hard-to-find leaks in underground lines, we introduce a safe tracer gas and use a detector to follow it to the escape point. It is precise and works where acoustic tools struggle.

Electronic Leak Detection Equipment

This sends a signal along the pipe and measures where it escapes. It is accurate to within a few inches, which means we dig or cut only where we need to.

Methods & Standards

Pressure Isolation Testing

We isolate sections of your plumbing system and pressure-test each one individually. This tells us which line is leaking and narrows the search area fast. It is the first step on almost every leak repair job.

Acoustic Correlation

We place sensors at two points on the line and measure the time it takes for the leak sound to reach each one. The difference tells us exactly where the leak is. This is how we pinpoint slab leaks within inches.

Thermal Mapping

We scan walls, floors, and ceilings with an infrared camera and map temperature anomalies. Escaping water shows up as a cold or hot spot depending on the line. This gives us a visual target before we open anything.

Tracer Gas Injection

For underground leaks where acoustic tools are not enough, we inject a safe tracer gas into the line and follow it with a detector. It works on water mains, irrigation lines, and pool plumbing.

Camera Inspection

We run a camera through drain and sewer lines to see the inside of the pipe. This is how we find cracks, root intrusion, and failed joints that do not show up on pressure tests. You see the footage before we quote the repair.

When to Call Us for Leak Repair in Brea

01

Your water bill jumped by $150 or more with no change in usage.

What we do: We come out and pressure-test your system to find the leak. Most hidden leaks are found within an hour using acoustic and thermal equipment. We show you the source and quote a flat repair price.

→ Your water bill goes back to normal the next billing cycle, and you avoid the damage that a hidden leak would have caused.

02

You see a wet spot on the floor or a stain spreading on the ceiling.

What we do: We trace the water back to its source with moisture meters and thermal imaging. Then we open the smallest area possible to access the leak, repair it, and verify the area is drying.

→ The leak stops, the stain stops spreading, and you avoid mold and structural damage. Most repairs are done the same day.

03

You hear running water when everything in the house is off.

What we do: That sound usually means a pressurized line is leaking. We use acoustic listening devices to pinpoint the location, then confirm with pressure testing. We repair the line and test it before we leave.

→ The sound stops, the leak is fixed, and you have a written summary of the repair for your records.

04

A pipe bursts at 2 a.m. and water is spreading across the floor.

What we do: Call (657) 681-3703. We run 24/7 emergency leak repair in Brea. We dispatch a technician immediately, shut off the water if you have not already, and repair the burst pipe on the spot.

→ The water stops, the pipe is repaired, and you avoid thousands in water damage. We also help you document the damage for your insurance claim.

05

Your pool is losing more than a quarter-inch of water per day.

What we do: We use leak detection dye and pressure testing to find the leak in the shell, plumbing, or equipment pad. Most pool leaks are located and repaired the same day.

→ Your pool stops losing water, your pump runs less, and your water bill drops. We verify the repair with a pressure test before we leave.

How Leak Repair Works in Brea Specifically

Brea has a mix of housing stock that affects how we approach leak repair. Homes in Downtown Brea and Birch Hills were largely built in the 1950s through the 1970s, and many still have original copper or galvanized plumbing. That plumbing is now at the age where pinhole leaks and joint failures are common. Newer neighborhoods like La Floresta and Lambert Ranch have PEX and newer copper, but the clay-heavy soil still shifts with our dry summers and wet winters, which stresses underground lines and causes slab leaks. We also deal with high water pressure in some parts of the city, which accelerates wear on fittings and valves. If you need water leak repair Brea, we know where to look first based on your neighborhood and the age of your home. We also handle 24/7 leak fixing in Brea California for emergencies, because water damage does not wait for business hours.

Neighborhoods We Serve

  • Downtown Brea

    Older homes with original copper plumbing. Pinhole leaks and joint failures are common. We know the layouts and where the lines run.

  • La Floresta

    Newer construction with PEX and copper. Slab leaks are less common, but irrigation and pool leaks are frequent due to landscaping.

  • Country Hills

    Mix of 1980s and 1990s homes. Copper supply lines are reaching the age where pinhole leaks start. We see a lot of water heater leaks here too.

  • Birch Hills

    Established neighborhood with mature trees. Root intrusion in sewer lines is a common problem. We run cameras to find it before it causes a backup.

  • Olinda Village

    Hillside homes with complex plumbing runs. Slab leaks and underground line leaks are common. We use acoustic and tracer gas detection to find them without digging up the yard.

Local Conditions We Plan For

  • Clay-heavy soil that shifts with wet and dry seasons

    This movement stresses underground pipes and slab foundations, causing cracks and leaks. We see a spike in slab leak calls after the first heavy rain of the season.

  • High water pressure in some parts of the city

    Pressure above 80 PSI accelerates wear on fittings, valves, and water heaters. We check pressure on every job and recommend a regulator if it is too high.

  • Older homes with original copper or galvanized plumbing

    These pipes are at or past their expected service life. Pinhole leaks and joint failures are common. We repair what we can and show you when replacement makes more sense.

  • Mature trees with aggressive root systems

    Roots find their way into sewer lines and water mains. We use camera inspection to find root intrusion before it causes a backup or a leak.

Slab Leak Fixed in Country Hills

Before

A homeowner in Country Hills noticed a $220 jump in their water bill and a warm spot on the floor. Two other plumbers told them they needed a full repipe. We used acoustic listening devices and thermal imaging to find a single pinhole leak in a copper line under the slab.

After

We cut one 18-inch access point in the slab, repaired the failed section with new copper, and pressure-tested the line. The repair took four hours. The water bill returned to normal the next cycle, and the homeowner saved $8,000 compared to the repipe quotes.

Maintenance: We recommended checking water pressure and installing a regulator if it was above 80 PSI. We also suggested monitoring the water bill monthly for any future spikes.

Before

A 1960s bungalow in Downtown Brea had a stain spreading on the ceiling below the bathroom. The homeowner had no idea where the leak was coming from. We used a moisture meter and thermal camera to trace it to a pinhole leak in a copper supply line behind the wall.

After

We opened a 12-inch section of drywall, repaired the pinhole with epoxy putty, and pressure-tested the line. The repair took two hours. The stain stopped spreading, and the wall cavity dried out within 48 hours. Total cost was $380.

Maintenance: We recommended leaving the access panel open for a week to verify the area stayed dry. We also suggested a whole-house pressure check to make sure no other lines were at risk.

Before

A homeowner in La Floresta was losing about an inch of water per day from their pool. The auto-fill was running constantly, and the water bill was up $180. We used leak detection dye and pressure testing to find a crack in the return line near the equipment pad.

After

We excavated the line at the leak point, repaired the crack with epoxy, and pressure-tested the return line. The repair took three hours. The pool stopped losing water, and the auto-fill cycle returned to normal. The water bill dropped back to its usual amount.

Maintenance: We recommended checking the pool equipment pad monthly for wet spots and keeping the water chemistry balanced to prevent future cracks in the plumbing.

Leak Problems We Solve for Brea Homeowners

Most leaks start small and get expensive fast. Here are the problems we see most often in Brea and how we fix them before they cause serious damage.

Problem

Slab leak under the foundation

Water under your slab can cause cracks, shifting, and mold. It also drives up your water bill by hundreds of dollars a month. If ignored, foundation repair can cost $10,000 or more.

Our Fix

We locate the leak with acoustic listening devices and thermal imaging, then cut a single access point in the slab. We repair the failed pipe section and pressure-test the line. Most slab leak repairs are completed in one day.

Problem

Pinhole leak in copper pipe

A pinhole leak can spray water inside a wall for months before you notice. By then, you have mold, rotted framing, and a much bigger repair bill. It also wastes water and raises your bill.

Our Fix

We find the pinhole with electronic leak detection equipment, open the wall at the exact spot, and repair it with epoxy putty or by cutting out and replacing the failed section. We pressure-test and verify the wall cavity is drying.

Problem

Water heater leaking from the tank or fittings

A leaking water heater can flood a garage or closet in hours. If the tank itself is failed, no repair will fix it. If it is a fitting, the leak can usually be repaired on the spot.

Our Fix

We diagnose whether the leak is from the tank, the T&P valve, or a fitting. If it is a fitting, we repair it with new Teflon tape and pipe sealant. If the tank is failed, we quote a replacement and install it the same day.

Problem

Irrigation line leak wasting water

A broken sprinkler line can waste hundreds of gallons a week. You will see it on your water bill before you see it in the yard. It can also erode soil and damage landscaping.

Our Fix

We isolate each irrigation zone and pressure-test it to find the failed line. Then we repair the break with matching PVC or poly pipe and check the rest of the system for weak points. We also verify the controller settings.

Problem

Sewer line leak causing odors and backups

A sewer leak causes odors in the yard, soggy spots, and eventually backups into your home. It is a health hazard and can cost thousands to remediate if the soil is contaminated.

Our Fix

We run a pipe inspection camera through the sewer line to find cracks, root intrusion, and failed joints. Then we repair or replace the damaged section. We verify flow after the repair and check for any remaining blockages.

Why Brea Homeowners Choose Our Leak Repair

Why Brea Homeowners Choose Our Leak Repair

We fix leaks fast, we fix them right, and we show you exactly what we found before we start. Here is what that looks like in practice.

  • Same-Day Service Available

    Most calls before 2 p.m. get a technician on-site the same day. We carry common fittings, pipe clamps, and sealant on every truck, so we can complete most repairs in a single visit. If you need same day leak repair Brea CA, call early and we will fit you in.

  • Non-Invasive Detection First

    We use acoustic listening devices and infrared thermometers to locate the leak before we open anything up. That means less drywall removed, less concrete broken, and a smaller repair bill. On a typical slab leak, we cut one access point instead of three or four.

  • Upfront Pricing, No Surprises

    You get a flat price before we start. No hourly creep, no surprise charges for parts we already carry. Our affordable leak fixing Brea California customers get the same price whether the job takes two hours or four. We quote it, you approve it, we do it.

  • Code-Correct Repairs

    Every repair meets Uniform Plumbing Code (UPC) and California Building Standards Code requirements. We pull permits when the scope requires it and our work passes inspection the first time. That matters when you sell your home and the buyer's inspector looks at the repair.

Licensed, Insured, and Proven in Brea

Licensed & Certified

  • California State Plumbing License — issued by California State Licensing Board
  • C-36 Plumbing Contractor License — issued by California Contractors State License Board
  • Backflow Prevention Certification — issued by California Department of Public Health
  • OSHA Safety Certification — issued by Occupational Safety and Health Administration
  • EPA WaterSense Partner — issued by U.S. Environmental Protection Agency

Verified Reviews

Google ★★★★★4.9

Fast, professional, and honest. They found a slab leak that two other companies missed and fixed it the same day. The price was exactly what they quoted. I have already recommended them to two neighbors in Country Hills.

Yelp ★★★★★4.8

We had a pinhole leak in a copper pipe behind our kitchen wall. They used a thermal camera to find it without tearing out the whole wall. Repair took two hours and the price was fair. Great communication throughout.

BBB A+

As a property manager, I need contractors who show up and do what they say. Brea Leak Detection Pros has been my go-to for three years. They handle everything from slab leaks to irrigation breaks across my Brea properties.

Google ★★★★★5.0

Our water bill jumped by $200 and we could not figure out why. They came out the same day, found a leak in our irrigation line, and repaired it in under two hours. The bill went back to normal the next cycle. Could not be happier.

What Brea Customers Say About Our Leak Repair

Real experiences from customers who chose our Leak Repair services.

“We had a slab leak and two other plumbers told us we needed a full repipe. Brea Leak Detection Pros found the leak with a thermal camera, showed us the pipe on their inspection camera, and fixed just that section. Saved us thousands. The repair has held for over a year now.”

M

Maria G.

Homeowner, Country Hills

“I manage six commercial properties in Brea and have used these guys for three years. They respond fast, they find leaks other companies miss, and their pricing is straight. Last month they fixed a water main leak at one of my buildings in under four hours. No drama, no upsell.”

D

David R.

Property Manager, Downtown Brea

“Our water bill jumped by $200 and we could not figure out why. They came out, used acoustic equipment to find a pinhole leak in a copper pipe behind the kitchen wall, and repaired it the same day. The bill went back to normal the next cycle. Highly recommend.”

S

Susan L.

Homeowner, La Floresta

Frequently Asked Questions About Leak Repair in Brea

Real answers to the questions we hear most often from local homeowners and property managers.

How much does leak repair cost in Brea CA?
Most residential leak repairs in Brea run $250 to $850 in 2026, depending on location and pipe material. A simple faucet or toilet leak might be $150 to $250. A slab leak that requires breaking concrete and rerouting a line can run $1,200 to $2,500. We give you a flat quote before we start, so you know the number upfront.
Who does leak fixing in Brea California?
Brea Leak Detection Pros handles leak fixing in Brea California for both homes and businesses. We are a licensed C-36 Plumbing Contractor with 15 years in the city. We fix slab leaks, pinhole leaks, water heater leaks, pool leaks, and everything in between. Call (657) 681-3703 and we will schedule a visit, often the same day.
How long does leak repair take in Brea CA?
Most leak repairs take two to four hours from arrival to final pressure test. Detection adds 30 to 60 minutes. A simple faucet or toilet repair might be done in under an hour. A slab leak that requires concrete cutting and line rerouting can take a full day. We tell you the expected timeline when we quote the job.
Can you repair a leak without replacing pipes in Brea CA?
Yes, in many cases. Pinhole leaks in otherwise sound copper can be repaired with epoxy putty or a pipe clamp, and failed joints can be re-soldered or re-fitted with new sealant and Teflon tape. If the pipe is corroded or has multiple leaks, replacement is the better long-term fix. We show you the pipe condition on camera and let you decide.

Related Leak Services We Offer in Brea

Slab Leak Detection

Slab leaks are one of the most common reasons Brea homeowners call us. We use acoustic listening devices and thermal imaging to locate the leak under your foundation before we cut concrete. Once found, we repair the line and restore the slab.

View Slab Leak Detection

Pool Leak Detection

A pool losing more than a quarter-inch of water per day has a leak. We use leak detection dye and pressure testing to find it in the shell, plumbing, or equipment pad. Most pool leaks in Brea are fixed the same day we find them.

View Pool Leak Detection

Plumbing Leak Detection

Your plumbing system has dozens of joints, and any one of them can fail. We pressure-test supply lines, drain lines, and fixtures to isolate the leak. Then we repair it with materials that match your existing pipes.

View Plumbing Leak Detection

Gas Leak Detection

A gas leak is a safety emergency. We use tracer gas detectors and ultrasonic leak detectors to find the source fast. If you smell gas, leave the building and call us at (657) 681-3703. We respond 24/7.

View Gas Leak Detection

Acoustic Leak Detection

Acoustic listening devices let us hear water escaping through concrete, behind walls, and under slabs. It is the least invasive way to find a hidden leak. We use it on nearly every slab and underground leak job in Brea.

View Acoustic Leak Detection

Thermal Imaging Leak Detection

Infrared cameras from FLIR show us temperature differences caused by escaping water. This is how we find leaks behind tile, inside walls, and under floors without tearing anything out. It pairs with acoustic detection for a complete picture.

View Thermal Imaging Leak Detection

Need Leak Repair Brea CA? Call Now.

We are licensed, insured, and have been fixing leaks in Brea since 2011. Same-day service is available, and we run 24/7 for emergencies. Call (657) 681-3703 and we will find the leak, quote a flat price, and fix it right.

Call (657) 681-3703 Call Now

Contact Brea Leak Detection Pros

Call (657) 681-3703 any time, day or night. A live dispatcher answers, asks a few questions about what you are seeing or smelling, and gets a tech headed your way. Most Brea calls get a same-day window, and emergency calls roll 24/7. You can also email [email protected] and we will respond within one business hour during regular hours.

Or call us right now at (657) 681-3703 — we answer.

Brea Leak Detection Pros


  • Address

    200 Fig Ave, Brea, CA 92821, USA

  • Hours

    Monday–Sunday: 7 Days a Week
    Open 24 Hours
    Same-Day Service
    24/7 Emergency Available

Call (657) 681-3703 Get Quote
Call Quote